Perle Systems 833IS - Manual (Page 191)

Chapter 9: Configuring the Server
Perle 833IS User Guide 175
The RADIUS configuration screen contains the following:
Authentication server
Click on the Primary Authentication tab to configure the main RADIUS
authentication server. Click on the Backup Authentication tab to configure the
backup RADIUS authentication server.
Accounting server
Click on the Primary Accounting tab to configure the main RADIUS accounting
server. Click on the Backup Accounting tab to configure the backup RADIUS
accounting server.
Host Retry
The length of time in minutes after which the 833IS should retry a RADIUS host
which had previously become unreachable. At the expiration of this retry time, the
833IS will attempt to communicate with the RADIUS host. If no response is
received, the RADIUS will remain in an off-line state. The next attempt by the 833IS
to re-establish communications with this RADIUS host will occur when the time
specified by the parameter elapses. The default value is 60 minutes.