Perle Systems 833IS - Manual (Page 298)

Accounting Messages
282 Perle 833IS User Guide
Accounting Messages
This section describes the attributes which will beincluded by the 833IS when
sending an accounting message to the RADIUS server.
Number Name Description
40 Acct-Status-Type Indicates if this is the beginning or end of a
session. Supported values include:
1 = Start
2 = Stop
41 Acct-Delay-Time Number of seconds the 833IS has been
attempting to send this accounting event.
42 Acct-Input-Octets Number of bytes which were received from the
client during this session. 1
43 Acct-Output-Octets Number of packets which were transmitted to
the client during this session. 1
44 Acct-Session-ID A string which identifies the session. The
same string must be used in the start and stop
messages.
45 Acct-Authentic Method used to authenticate the user. Sup-
ported values include:
1 = RADIUS
46 Acct-Session-Time Number of seconds for which the user has
been connected in this session. 1
47 Acct-Input-Packets Number of packets which were received from
the client during this session. 1
48 Acct-Output-Packets Number of packets which were transmitted to
the client during this session.
1