Perle Systems 833IS - Manual (Page 31)

Chapter 2: Site Preparation
Perle 833IS User Guide 15
10Base-T:
■ Uses 22 to 26 AWG unshielded twisted pair (UTP) cable.
■ Terminated with RJ-45 plugs.
■ Cables are straight wired – pin 1 of one end of the cable is wired to pin 1 on the
other end.
■ Category 3, 4 and 5 UTP cable is acceptable.
■ For best results, Category 4 and 5 cable is recommended.
■ Cables are attached to a 10Base-T hub in a star configuration.
■ Maximum length from 833IS to hub is 100m (328 ft.).
10 Base-T Hub Category
3,4,5 UTP
▲ 10 Base-T Network