Panasonic KX-FC241AL - Manual (Page 76)

9. Programmable Features
74
9.5.1 Programmable functions
Helpful hints:
L To exit programming, press {ih} at any
time.
9.5.2 Memo alarm
Setting memo alarm
An alarm will sound for 3 minutes at the set time
once or daily. 3 different alarms can be set. A text
memo can also be displayed.
Set the date and time beforehand (page 26).
1. Press $ (centre of joystick).
2. Select t, then press ,.
3. Select “ Memo Alarm”, then press ,.
4. Push the joystick up or down repeatedly to
select an alarm (1 to 3).
L Times and memos for previously set
alarms will be displayed. To delete the
previous setting, press _, select
“
Yes”, then press ,.
5. Press ,.
6. Select an alarm mode, then press ,.
“ Off” (default): Turns the alarm OFF.
L If you select “ Off” skip to step 13.
“ Once”: The alarm will sound once at the set
time. Enter the desired date and month by
selecting 2 digits for each.
“
Daily”: An alarm will sound daily at the set
time.
7. Enter the desired hour and minute by
selecting 2 digits for each.
8. Press / repeatedly to select “ AM”, “PM”,
or 24-hour time entry, then press ,.
L If you do not need to enter a text memo,
skip to step 10.
9. Enter a text memo, up to 32 characters (see
page 88 for instructions).
10. Press ,.
11. Select the ringer that will sound at the set
time.
12. Press ,.
13. Press ,.
14. Press {ih}.
Note:
L To stop the alarm, press {C}, {ih}, {s},
{
0} to {9}, {*}, {#} or {INT}.
L When the cordless handset is in talk or
intercom mode, the alarm will not sound until
the call has ended.
L Memo alarm volume depends on cordless
handset ringer volume (page 25).
L The alarm will sound at the set time even
when the ringer is turned OFF.
L If you select “ Once”, the setting will be
changed to “ Off” after the alarm sounds.
9.5.3 Ringer options
Changing ringer types
You can select the ringer type for the cordless
handset from one of 15 types.
“
EXT Ringer Type”: Selects the ringer heard
for outside calls.
“
INT Ringer Type”: Selects the ringer heard
for intercom calls.
“
Paging Tone”: Selects the ringer heard when
all cordless handsets are paged.
“
Private Ring”: Allows you to set a different
ringer for each private category (for Caller ID
service users only, page 38).
1. Press $ (centre of joystick).
2. Select s, then press ,.
3. Select the desired item, then press ,.
L The ringer sounds using the current
ringer type.
L If you select “ Private Ring” choose
the desired category, then press ,.
4. Select the desired ringer type, then press
, .
5. Press {ih}.
Note:
L If you select one of the melody ringer types,
the ringer will continue to sound for 10
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one
on the line when you answer a call.
L The preset melodies in this product are used
with permission of M-ZoNE Co., Ltd.
L To set the base unit ringer type, see feature
#17 on page 67.
$ /,
/ /_
{ih}
{ INT }
{C}
{s}
FC243AL-PFQX2096ZA-en.book Page 74 Thursday, September 30, 2004 3:37 PM