Panasonic KX-FC241AL - Manual (Page 82)

9. Programmable Features
80
8. Select a memory location, then press ,.
L Previously stored telephone numbers are
displayed.
9. Enter the telephone number or area code to
be restricted (up to 8 digits), then press
,
.
L To erase a restricted number, press {C}.
10. Press {ih}.
Note:
L If you put a first digit in step 9, the previously
stored number will be all cleared. We
recommend you to write down the previously
stored number.
Selecting area codes to be deleted
automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 40) will
include area codes. If you do not want to dial the
area codes when making calls from the Caller ID
list, you can store the area codes which you want
the unit to delete automatically.
Example: You have stored the area code “
123”.
If you make a call from the Caller ID list to the
phone number “
123-456-7890”, the unit dials
“ 456-7890”.
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Call Option”, then press ,.
5. Select “ Set ARS”, then press ,.
6. Select “ Set Area Code”, then press ,.
7. Select an area code location (1-25), then
press ,.
L If the location already contains an area
code, the code is displayed.
8. Enter an area code (5 digits max.), then
press ,.
9. Press {ih}.
Note:
L The use of this feature can prevent a National
Call from being dialled. E.g., in the case of
the South Island, the “03” will be omitted and
will therefore prevent a National Call to other
areas of the South Island. (for New Zealand
users only)
9.6.2 Other options
Changing the base unit PIN (personal
identification number)
For security, the base unit PIN must be entered
when changing certain settings. The default PIN
is “
0000”.
Important:
L If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it.
4. Select “ Other Option”, then press ,.
5. Select “ Change Base PIN”, then press
, .
6. Enter the new 4-digit base unit PIN.
7. Enter the new 4-digit base unit PIN again.
8. Press {ih}.
Resetting the base unit advanced features
to their default settings
The base unit advanced features (page 67 to
page 70) can be reset with the cordless handset.
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Other Option”, then press ,.
5. Select “ Reset Base”, then press ,.
6. Select “ Yes”, then press ,.
7. Press {ih}.
Note:
L The ECM setting (feature #68 on page 69)
will not be reset.
L You can also reset the base unit advanced
features with the base unit (feature #80 on
page 70).
FC243AL-PFQX2096ZA-en.book Page 80 Thursday, September 30, 2004 3:37 PM