Charging the battery, Battery charge level indicator – Panasonic EB-X800 User Manual

Page 21

Advertising
background image

18

Getting Started

Charging the battery

Your phone can be charged either when it is switched on or off. You
can use your phone switched on even while charging.
Ensure that the battery is attached in the phone before charging.

1. Open the connector cover at the left

side of the phone as you turn over
and upside down the phone.
Connect the charger to the Charging
Connector, then connect the charger
to the mains power supply.

2. When charging is complete,

disconnect the charger from the outlet
before removing the plug from the
phone. You should press and hold the
release buttons on both side of the
connector end and pull gently to
disconnect the charger from the
phone.

Battery charge level indicator

Note: DO NOT force the connector as this may damage the phone and/or
the charger.

If the battery has been deeply discharged, it may take several minutes
before the Battery charge level indicator is displayed.

While charging

Charging complete

Scrolling

Not scrolling

If the phone is switched on, “Battery
full
” message appears.

Advertising