Panasonic EB-X800 - Manual (Page 50)

47
Settings
To view, edit, or add new access points, first you must obtain the
configurations from your service provider to be entered into the
phone.
To view an access points list:
z
Main menu > Settings > Settings > Connection > Access
points
indicates Data call, and indicates GPRS connection.
To add a new access point:
1. In the access points list, [5] (Options)
2. [192] to scroll to New access point 7 [4]
3. [192] to scroll to Use default settings or Use existing
settings 7 [0]9[5] (Select)
4. If you select Use existing settings, [192] to scroll to the
desired setting 7 [0]9[5] (Select)
5. Continue with step 3 in “To edit an access point:” on page 47
To edit an access point:
1. In the access points list, [192] to scroll to the desired access
point 7 [5] (Options)
2. [192] to scroll to Edit 7 [0]9[5] (Select)
3. [192] to scroll to the desired setting 7 [0]
4. Enter information in fields. Fields marked in the phone with a
red asterisk (*) must have an entry. The bearer type you
choose determines which fields are presented
Note: Types of data services your phone can support are: Data call (Circuit
switched data) and GPRS (Packet data). Contact your service provider to
find out about types of data technologies offered and subscription rates.
* Connection name Enter an easy-to-recall name if not assigned.
Data bearer Select GPRS or Data call.
* Dial-up number* 1 Enter access point dial-up phone number.