Panasonic EB-X800 - Manual (Page 49)

46
Settings
* 1
* 2 Available if you have subscribed to Alternative Line Service.
Connection settings
Access point settings
Your phone uses three main sets of access points: Multimedia
(MMS), Browser, and Internet. Access points must be set up in order
to send and receive multimedia and e-mail messages, use the
Browser, SyncML and Device Manager, and use your phone as a
modem.
Access points use data services to connect.
Some or all of your access points may be preset in the phone by
your service provider and cannot be modified, but you may be able
to add new access points. The access point configurations may be
sent to you in a smart message by your service provider.
Speed dialling
Select On to start dialling by a press and hold of preset
number key in standby mode. First, set up Speed dial
keys (see “Speed dial” on page 59).
Anykey answer
Select On to answer incoming calls by pressing any key
except [6], [w] or [,].
Active
clamshell
Select On to answer a call by opening the flip clamshell
and to disconnect phone calls by closing the flip
clamshell. When set to Off, you must answer the
incoming call by [q]. Closing the flip clamshell switches
the caller’s voice to the back loudspeaker and mutes
your voice.
Line in use* 2
You can have two different phone lines with the same
SIM card. Select Line 1 or Line 2.
Line change* 2
You can disable selection of one of the phone lines. The
PIN2 code is required to return use of a previously
blocked line.