Panasonic EB-X800 - Manual (Page 54)

51
Settings
z Main menu > Settings > Settings > Security > Phone and SIM
1. [192] to scroll to the desired setting 7 [0]
Entering lock code to use phone
When the phone is locked, the lock code must be entered before the
phone can be used. The phone lock icon indicates that the phone
is locked.
You may be able to dial the local emergency number and accept
incoming calls when the phone is locked.
z Main menu > Settings > Settings > Security > Phone and SIM
1. [192] to scroll to the desired setting 7 [0]
Activate Phone
PIN Select Yes to require entry of PIN code each time the
phone is switched on. Requires PIN code to activate.
PIN
To change PIN code, enter current PIN code, new PIN
code twice, then [5] (OK).
PIN2
To change PIN2 code, enter current PIN2 code, then
new PIN2 code twice, then [5] (OK).
Note: If PIN or PIN2 code is entered incorrectly 3 times, the SIM card locks.
Contact your service provider for PUK or PUK2 code (PIN unblock key
code). If the PUK or PUK2 code is entered incorrectly 10 times, the phone
will not operate. All information stored in the SIM card is lost and the SIM
card must be replaced.
Shortcut: To lock the phone, [,] and select Lock phone.
Autolock
period
Set the phone to lock after a time period of no activity.
Select User defined to enter time period in minutes.
Requires lock code to set.
Lock code
To change the lock code, enter the current lock code,
then new lock code twice. Record the new code in a safe
place. The preset lock code is 12345.