Planet Technology VDSL2 VC-200M - Manual (Page 12)

12
Step 2. Connect a Workstation to the Router's LAN port
Uses the supplied RJ-45 cable connects to PC with the Switching Hub port of VDSL2
ROUTER. Both 10Base-T and 100Base-TX connections can be used simultaneously.
If required, using a standard RJ-45 cable connect to any LAN port of VDSL2
ROUTER with a normal Hub.
Any LAN port of VDSL2 ROUTER will automatically function as an "Uplink" port
when required.
Step 3. Connect the Power Adapter to the Router
Connect the power adapter to the port labeled 12V DC on the rear panel of router.
Step 4. Connect All Cables to the Network
The procedure for connecting cables differs depending on whether or not your
telephone equipment is connected to a POTS splitter.
2.3 Configuring the Network Properties
2.3.1 Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic View). In the Control Panel,
double-click on Network Connections
2. Double-click Local Area Connection.