Planet Technology VDSL2 VC-200M - Manual (Page 46)

46
Enable Enable or disable the DMZ setting of VDSL2 ROUTER.Select the
check box to enable this option.
IP Address Enter IP Address of the DMZ host.
z
Click “CANCEL” to exit from this page without saving the changes.
z
Click “APPLY” to save the information that has been entered.
3.5.7 Route
The Route Settings can be viewed in the left navigation bar. The following are the
options available under Route, show as below.
z
Static Routing
z
Routing Table List
3.5.7.1 Static Route
The static routing function determines the path that data follows over your network
before and after it passes through your router. You can use static routing to allow
different domain users to access the Internet through this Router.
To setup Static Routing, click on the Static Routing link in the left navigation bar,
show as below.