Planet Technology VDSL2 VC-200M - Manual (Page 9)

9
Front Panel LED definition
LED State Description
ON When the router is powered on, and in ready state. PWR
OFF
When the router is powered off.
Flashing Router is trying to establish a connection between
VC-200M and VC-200S, or telecom’s network. LNK
ON Successfully connected between VC-200M and
VC-200S, or router and telecom's network, and in
ready state.
DSL
ACT Flashing Data is being transmitted or received.
LNK/ACT Flashing/ON Data is being transmitted or received via the
corresponding LAN port, and in ready state.
LAN
1-4
100 ON Orange color, it corresponding LAN port is using
100BaseT.
Rear Panel
Rear panel Port and Button Definition
Connector Description
POWER Power connector with 12V DC 1 A
RESET
Button
Press 1-3 seconds for reboot system.
Press more than 5 seconds for reset to factory default setting.
LAN (1-4) Router is successfully connected to a device through the corresponding
port (1, 2, 3, or 4). If the LED light of LNK/ACT is flashing, the Router
is actively sending or receiving data over that port.
PHONE The RJ-11 connector allows voice communication between the router