Planet Technology VDSL2 VC-200M - Manual (Page 40)

40
z
Click “APPLY” to save the information that has been entered.
3.5.5 LAN
The LAN setting can be viewed in the left navigation bar. The following are the
options available under LAN, show as below.
z
LAN settings
z
DHCP Client List
3.5.5.1 LAN Setting
To configure the LAN interface, click on the LAN Setting link in the left navigation
bar, show as below.
The Dynamic Host Configuration Protocol (DHCP) Server gives out IP addresses
when a device is booting up and request an IP to be logged on to the network. It must be
set as a DHCP client to obtain the IP address automatically.
Note: By factory default, the DHCP is disabled, VC-200M’s default LAN IP address
is 192.168.1.100, and VC-200S is 192.168.1.200.