Panasonic WJ-MP204C - Manual (Page 19)

19
■ Prior to setup
● Confirmation
1. Connections and switch settings are complete.
2. Switch on the power of the connected system devices
including the monitor that displays the menus.
3. Turn on the power of the WJ-MP204C.
4. When setting at the camera site, remove the front cover
from the unit to make access possible to the buttons on
the front panel.
5. When setting with use of a WV-CU360C System
Controller, confirm that the OPERATE indicator is lit on
the Controller, meaning that the unit is ready for opera-
tion.
● To open or close the setup menu
1. Hold down the SETUP/ESC button on the front panel for
2 seconds. Image display will change to the menu win-
dow on the monitor, or vice versa.
2. When using a WV-CU360C, hold down the SETUP but-
ton on the controller for 2 seconds. The setup menu will
open or close.
On the window, you can select and enter the parameter
using buttons. A sub menu will open when a line having
a [return
] mark at its end is selected.
● Buttons used in the setup
The following buttons are used in the setup. Operations on
the following pages are explained on the assumption that
the front panel buttons on the WJ-MP204C are used. Check
below which WJ-MP204C front panel buttons are equivalent
to the buttons on the WV-CU360C.
• Data Multiplex Unit WJ-MP204C
[ C ] button: Moves the cursor downward.
[ D ]: Moves the cursor upward.
[–]: Decreases the parameter value.
[+]: Increases the parameter value.
[SET]: Validates the selected parameter, or opens a
sub menu when [ ] appears.
[ESC]: Returns the menu to a higher layer.
• System Controller WV-CU360C
SETUP PROCEDURES
WJ-MP204C SETUP MENUX.XX
COMMUNICATION
SYSTEM
OPERATE LOGIN ALARM
CAM SETUP
PROGRAM
PROGRAM
PRESET
UNIT A
IRIS
CLOSE OPEN
NEAR FAR
WIDE TELE
FOCUS
ZOOM
AUTO FOCUS
IRIS RESET
AUTO
SETUP
ALM SUSPEND
FUNCTION CAM FUNCTION
MULTI SCREEN SELECT DEF
WIPER EL-ZOOM
SHIFT
ALM RESET
VCR CAM
STILL
– +
ALM RECALL
PATROL
LEARN
PATROL
STOP
AUX 1
AUX 2
B/W UNIT
SEQ PAUSE
SLOW
SEQUENCE PATROL PLAY HOME/PRESET
UNIT B
MON CAM
LOGOUT ESC SET
UP
L R
DOWN
BUSY PROHIBITED
MONITOR
UNIT
CAMERA
System Controller WV-CU
360
C
ALARM
Data Multiplex Unit WJ-MP204C
ALARM
SUSPEND
1 2 3 4
ESC SET
RESET SUSPEND SET UP
ALARM UNIT
0 9 8
7 6 5 4 3
2 1
: Moves the cursor up and down.
: Increases or decreases the parame-
ter value.
: Validates the selected parameter, or
opens a sub menu when [ ]
appears.
: Returns the menu to a higher layer.
DOWN
L R
UP
L R
STILL
–
EL-ZOOM
+
MON
CAM
ESC
SET