Panasonic WJ-MP204C - Manual (Page 30)

30
SPECIFICATIONS
Power Source : 120 V AC 60 Hz
Power Consumption : 7 W
Camera Input : 1 V[p-p]/75
Ω
x 4
Spot Input : 1 V[p-p]/75
Ω
x 1
VS/VD Input : VS (1 V[p-p]/75
Ω
), or VD (4 V[p-p]/75
Ω
) x1
Camera Output : 1 V[p-p]/75
Ω
(Looped through) x4
Spot Output : 1 V[p-p]/75
Ω
x1 (Changeable Output from camera input or Spot input)
VS/VD Output : VS/VD IN (Looped through), or internal VD (4 V[p-p]/75
Ω
) x 1
Data Communication Standard : Based on RS-485 (4-Line/2-Line* 1 )
Modular Jack x 1, or 5-pin terminal x 1* 2
Alarm Input : 4 (Alarm Output/Remote Input/Remote Output selectable)* 3
Alarm Output : 1 (O.C. [16 V, 100 mA])
Alarm Recover Input : 1 (No Voltage Contact)
Alarm Reset Output : 1 (0/5 V
↔
O.C. [16 V, 100 mA])* 4
Spot Switching Input : 1 (No Voltage Contact)
Spot Switching Output : 1 (O.C. [16 V, 100 mA])
Unit address : 1 - 8 (Set with UNIT switch) 9-99 (Set in Setup menu)
Operating for System : Selection Camera
Alarm (Data/Display/Reset/Suspend)
Setup
Camera, Lens, Housing, PAN/TILT, External device control
Ambient Operating Temperature : –10°C - +50°C (14°F - 122°F )
Ambient Operating Humidity : Less than 90 %
Dimensions : 210 (W) x 44 (H) x 350 (D) mm
[8-9/16”(W) x1-3/4”(H) x13 3/4”(D)]
Weight : 2.6 k g (5.72 lbs.)
*1 Selectable using the mode switch
*2 Valid in communication mode
*3 Selectable using the setup menu and internal connector
*4 Selectable using an internal switch
Dimensions and weight are approximate.
Specifications are subject to change without notice.