Press [prog/check, Check, change or delete a programme, Icons ∫ to change a programme – Panasonic DMR-BS750 User Manual

Page 37

Advertising
background image

37

RQT9434

Reco

rd

ing

Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Icons

To change a programme

Press [

3, 4] to select the programme and press [OK]. (> 35,

step 3)

To delete a programme

Press [

3, 4] to select the programme and press [DEL].

To exit the timer recording list

Press [PROG/CHECK].

[Note]

≥Programmes that failed to record are deleted from the timer

recording list at 4 a.m. two days later.

≥Only 1 programme can be set to timer recording on the disc.

≥Timer recording will not be performed if the clock is not set.

≥If the “TV System” (> 93) in the Setup menu was modified to

playback a disc or a title while on timer recording standby, return
the setting to original before the recording is started.

≥Timer recordings are activated regardless of whether the unit is

turned on/off.

≥Timer recordings begin when the set time is reached even when

playing. Depending on the state of the unit, playback may stop
when recording begins.

≥Timer recordings do not begin while copying in normal speed

mode.

≥The timer recording starts, whether the unit is turned on or off.

When the recording starts with the unit turned on, if you should turn
the unit off the recording status is not affected.

≥When you programme successive timer recordings to start

immediately one after the other, last 1 minute of earlier programme
will not be recorded unless it can perform 2 programmes
simultaneous recording.

≥If timer recordings overlap around the same time, some

programmes will not be recorded depending on the set timer

recordings. As for programmes with “

” displayed on the timer

recording list screen, some portion or all of the programmes cannot
be recorded. Press [PROG/CHECK] to confirm. (

> left)

≥It is not possible to simultaneously record multiple programmes

from encrypted broadcasts.

Starting of the timer recording while executing other operation
(

> 104)

Check, change or delete a programme

F

Red: Timer recording standby is activated.
Grey: Timer recording standby is not activated.

[

This programme is currently recording.
Part or all of the programme will not be recorded since
the programme is overlapping.
The disc was full so the programme failed to record.

The programme was copy-protected so it was not
recorded.
The programme did not complete recording because of
some reason.
Timer programmes set to Auto Renewal Recording
(

> 36).

The timer recording of the encrypted broadcast is
overlapping another programme.

OK:

Displayed if the recording can fit in the remaining space.

> (Date): For recordings made daily or weekly, the display will

show until when recordings can be made (up to a
maximum of one month from the present time) based on
the time remaining on the disc.

! :

It may not be possible to record because:
≥there is not enough space left.

≥the number of possible titles has reached its maximum.

(

> 29)

≥programmes are deactivated.

Channel Name

Schedule Drive/Mode Space

New Timer Programme

OK

RETURN

Page Up

Page Down

CH

Turn
Timer Off

Total 4/64

Timer Recording

75:15 DR

HDD

OK

OK

FRI 27.03.2009 21:41

DEL

Delete

KiKa
Factory Tour
ZDF
Bruder
ZDFdokuk
Bowling Biographie
ZDF
Duell des Nachmittags

WED 27.05
22:20 - 23:45
FRI 27.03
10:40 - 12:00
FRI
22:30 - 23:25
FRI 27.03
21:30 - 23:30

HDD

DR

HDD

DR

HDD

DR

-->

24.04

HDD

DR

Notes on timer recording

Not recorded

Programme

Recorded

Recorded

Programme

DMRBS850&750EG-RQT9434-L_eng.book 37 ページ 2010年1月14日 木曜日 午後4時21分

Advertising
This manual is related to the following products: