Panasonic DMC-LC1GN - Manual (Page 19)

Preparation
19
Attaching the Strap
1 1 Pressing both sides of the
cover.
2 Pull out the black strap holder
completely.
2 Detach the black strap holder from
the metal fitting.
• When the black strap holder is
completely detached, attach it
again as above.
3 Pass the metal fitting through the
eyelet of the camera.
4 Rotate the black strap holder in
the opposite direction until it
clicks.
5 Slide the cover until it is attached
firmly.
• Attach the strap to the other side of the
camera being careful not to twist it.
• Attach the strap so that you can see
“L UMIX ” logo.
• Check if the strap is firmly attached to
the camera.
LC1-GN.book 19 ページ ２００４年１月２９日 木曜日 午前９時１５分