Finely adjusting the white balance – Panasonic DMC-LC1GN User Manual
Page 64
Recording pictures (advanced)
64
Finely Adjusting the White Balance
If you cannot acquire the desirable hue with white balance because of too many
different light sources, etc., adjust the fine white balance as follows.
Preparation
• Set the operational mode dial except for [
]. (P29)
• Set the white balance to [
]/[
]/[
]/[
]/[
]. (P61)
1
Select [WB ADJUST.].
2
Adjust the white balance.
•
1 [BLUE]: Press when the hue is
reddish.
•
2 [RED]: Press when the hue is
bluish.
• Close the function by pressing
4/[REVIEW] after finishing the
adjustment.
¬Suggestions/Tips ¬
• The white balance icon turns red or
blue.
• You can set the value independently
for each of the modes in white
balance.
• When you set the white balance using
the White set [
], the adjustment
level is set to “0”.
• The adjusted picture will be close,
though may not be identical to the
actual picture.
WB
2560
REC
1
/
4
SETUP
W.BALANCE
WB ADJUST.
PICT.SIZE
QUALITY
SELECT
SET
EXIT
MENU
MENU
REVIEW
REVIEW
SELECT
EXIT
WB ADJUST.
RED
BLUE
REVIEW
LC1-GN.book 64 ページ ２００４年１月２９日 木曜日 午前９時１５分