Taking pictures using the built-in flash – Panasonic DMC-LC1GN User Manual

Page 44

Advertising
background image

Recording pictures (basic)

44

Taking Pictures using the Built-in Flash

Preparation
• Set the operational mode dial except for [

]. (P29)

ª To open the flash

Press the [

OPEN] button.

ª To close the flash

Press the flash until it clicks.

• Be sure to close the flash when not in

use.

ª Switching the flash setting

: AUTO

The flash is automatically activated
according to the recording condition.

: AUTO/Red-eye reduction

The flash is automatically activated
according to the recording condition.
It reduces the red-eye phenomenon
(eyes of the subject appear red in
photo flash) by lighting the flash

before the actual recording of the
picture.
Use this when you take pictures of
people in low lighting conditions.

: Forced ON

The flash is activated every time a
picture is recorded forcibly.
Use this when your subject is back-lit
or under fluorescent light.

: Forced ON/Red-eye reduction

The flash is activated every time a
picture is recorded forcibly.
Simultaneously it reduces the red-eye
phenomenon. Use this when your
subject is back-lit or under fluorescent
light.

: Slow sync.

When you take a picture with a dark
background landscape, it makes the
shutter speed slow when the flash is
activated, so that the dark
background landscape will become
bright.

: Slow sync./Red-eye reduction

When you take a picture with a dark
background landscape, it makes the
shutter speed slow when the flash is
activated, so that the dark
background landscape will become
bright. Simultaneously it reduces the
red-eye phenomenon.
Use this when taking pictures of
people with the dark background.

: Forced OFF

Even in dark places, the flash is not
activated.

OPEN

1

2

REVIEW

REVIEW

SET

SELECT

LC1-GN.book 44 ページ 2004年1月29日 木曜日 午前9時15分

Advertising