Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 107)

8580/8590 Vehicle-Mount Computer User Manual 81
Chapter 6: Operating System & Software Applications
Settings
Important: During import not all data is checked for validity; rather the data
is saved in the way that it is defined in the import file. False infor-
mation could lead to failure of 8580/8590 (such as malfunctions,
data loss, equipment damage etc.).
Common
Load factory defaults
Here default settings can be loaded that are saved in a
file named FactoryDefault_<Serial number>.cfg.
This file can only be generated by Psion Teklogix
service with a Psion Teklogix-internal program.
The AC-DC configuration warning does not appear, as
it is assumed that this is taken into account at installa-
tion.
If the file is not available, an error message about a
‘defect’ file appears.
Show/hide the software key-
board automatically on input
fields in Psion Teklogix
Config
The software keyboard starts automatically when
Psion Teklogix Config is started. When the cursor is
placed in an input field, it is always displayed.
A file named Keyboard.cfg must exist in the software
keyboard installation directory; otherwise an error
message appears.
If the keyboard is started by Psion Teklogix Config, it
is also terminated when Psion Teklogix Config is
closed. The software keyboard version 1.5 or higher is
mandatory for this.
An error message is displayed when errors occur.
The message is only visible after logging on.
Warning with query on
import of static network data
(computer name, IP
addresses)
If static IP addresses (when DHCP is disabled) and/or a
computer name are imported, a warning with corre-
sponding security query may appear.