Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 125)

8580/8590 Vehicle-Mount Computer User Manual 99
Chapter 6: Operating System & Software Applications
Defining The Keys
VK_KB_HIDE
If a key with this key code is pressed, then the associated keyboard win-
dow is removed from the screen. In addition, the Maximize keyboard
(Keyboard_Maximize) is activated if available.
Key Codes For Special Characters
PatternBitmap
Here, you can set a different bitmap pattern for the key; at present, only the entry
$ExtBmp1 is possible for keys highlighted in color, for example, the [RETURN] or
[TAB] key. If this entry is not used, then the entry including comma must be
omitted.
X-Len,Y-Len,X-Pos,Y-Pos
Here, you define the size and positioning of the key. For parameters left blank (,,,) or
parameters that are not available, the default value is always set.
The default value for the size is defined through the StdKeySize entry in the
Keyboard_xxx section. The default value for the positioning is always the next
X-position after the previously defined key in accordance with its size.
Virtual-Key Codes Hardware Key Codes
VK_NUMRET <Return> on numeric keypad
VK_CIRCUMFLEX 220
VK_SHARP_S 219
VK_ACCENT 221
VK_PLUS 187
VK_GER_UE 186
VK_GER_OE 192
VK_GER_AE 222
VK_NUMSIGN 191
VK_COMMA 188
VK_POINT 190
VK_SMALLER 226
VK_MINUS 189
VK_ALTGR VK_RMENU