Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 68)

Chapter 4: 8580/8590 Installation
The Cable Cover, Grounding Bar & Cables–Assembling
42 8580/8590 Vehicle-Mount Computer User Manual
5. Fix grounding plates and insert sealing plugs:
• Lightly fix the cables in the cable cover using the earthing plates.
• Test the fit of the cable cover relative to the equipment.
• Release the cables from the sealing rings so that the silicone can be
applied.
• Insert the sealing rings and cables with silicone in the cable openings of
the cable cover.
• Fix the cables firmly to the grounding plate.
6. Insert sealing plugs into the unused cable openings, and seal off all of
these with silicone.
7. Fix cable cover:
• Now, fix the cable cover to the 8580/8590.
• Observe the following important points during this operation:
Important: There must be no damage to the lid seal of the cable cover. It must
be possible to fit the cable cover to the equipment's cable duct
without excessive force. The partially threaded screws must be
tightened 5 turns at a time, preferably diagonally opposed.
Retighten the screws after 2 days.