Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 69)

8580/8590 Vehicle-Mount Computer User Manual 43
Chapter 4: 8580/8590 Installation
Mounting Options For The 8580/8590
Important: Please retain these mounting instructions. You must remove the
cable cover before connecting any other equipment and replace it
after connection. Please ensure you attach the cable cover follow-
ing the instructions in this guide. The protection class can no
longer be guaranteed if the cable cover is attached incorrectly.
4.2 Mounting Options For The 8580/8590
The 8580/8590 can be mounted in a variety of ways:
• Horizontally – The unit can be positioned horizontally on a desk or
mounted on a steering wheel and vehicle console.
• Wall mounted – Wall mounts are also available for mounting the unit on
machines and operating panels.
• Roof mounted – The vehicle-mount can also be mounted on the roof, for
example, under the vehicle roof.
Depending on the vibration resistance and pivoting demands, mounting brackets,
clamp foots or RAM mount elements can also be used to attach the device. Please
contact your Psion Teklogix sales office (refer to Appendix A) to find out more
about the whole range of installation options available.
Warning:
Risk of injury – The unit could fall during transit or installation
and cause injury. Always ensure that there are two persons avail-
able when installing or removing the device.
4.2.1 Mounting Bracket Toolkit
The following tools are required for positioning the 8580/8590 mounting bracket:
• For mounting and positioning the stationary mounting bracket: Hexagonal
socket wrench (Allen key) sizes 5 mm and 6 mm
• For mounting and positioning the mobile mounting bracket: Hexagonal
socket wrench (Allen key) size 6 mm
5mm Allen Key
6mm Allen Key