Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 74)

Chapter 4: 8580/8590 Installation
Cable Cover (Splash Guard)
48 8580/8590 Vehicle-Mount Computer User Manual
4.5 Cable Cover (Splash Guard)
Important: For safety reasons, the supplied cable cover for the external ports
must be installed prior to using the 8580/8590. Refer to “The
Cable Cover, Grounding Bar & Cables–Assembling” on page 40
for details about installing the cable cover.
4.5.1 Protection Class IP65
Important: In order to comply with protection class IP65, please use the
optionally available IP65 assembly kit from Psion Teklogix. Care-
fully follow the installation instructions under the heading “The
Cable Cover, Grounding Bar & Cables–Assembling” beginning
on page 40.
After finishing the mounting process, the cables must be affixed using the included
strain relief rail.
Figure 4.2 Cable With Strain Relief
Important: Take care not to damage the opening seal of the cable cover! It
should be possible to attach the cable cover to the cable duct
without using force. The neck collar screws should be screwed
firmly, preferably diagonally and always using 5 rotations. The
screws need to be retightened after 2 days.