Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 89)

8580/8590 Vehicle-Mount Computer User Manual 63
Chapter 6: Operating System & Software Applications
Windows XP Embedded
6.1.3.1 Windows XP Embedded
If the 8580/8590 is running Windows XP Embedded, not all USB devices will be
supported.
6.2 Psion Teklogix Config Tool
Psion Teklogix Config is used for the configuration of 8580/8590 vehicle-mounts.
Important:
The COM3 port of the 8580/8590 must remain free when starting
Psion Teklogix Config and throughout the entire running time of
this software. No cables, devices or machines may be connected.
Psion Teklogix Config requires the COM3 port to communicate
with the environment controller. Devices and machines connected
to the COM3 port could be severely damaged.
Psion Teklogix Config contains important settings for your vehi-
cle-mount. Incorrect settings, such as those in the Automatic
Switch off menu, can disable the functions of your unit. Only
qualified technical personnel, e.g. persons qualified in com-
puter/network/system administration may perform Psion Teklogix
Config settings.
If improper changes of the Psion Teklogix Config settings are
performed by the customer, this releases Psion Teklogix from all
liability for warranty claims.
6.2.1 Overview Of The Config Functions
These functions are detailed in “Psion Teklogix Config Menus” beginning on
page 67