Precision Power 355cs - Manual (Page 21)

1
bi-Wire connections to crossover
Connections from the crossover to the woofer and tweeter are the same as the
normal wiring method . Connect the amplifier to the tweeter input terminals with
one run of wire . Connect the amplifier to the woofer input terminals with another
run of wire .
NOTE: You must move the Bi-amp/parallel switch to the parallel position . Failure
to set the switch correctly will not damage the equipment, but could interfere with
any enhancement of the sound due to bi-wiring .
Tweeter
Woofer
Amplifer Crossover
IN OUT
+
-
-
+
-
+
-
+
Woofer
Tweeter
Woofer
Tweeter
+
-
+
-
+ -
Bi-Wired
(Switch in Parallel Position)
P B