Pioneer S-DV303 - Manual (Page 39)

Setting up for surround sound 06
39
En
English
Choosing your surround
sound settings
To get the best possible surround sound from
your system, make the settings below. This is
particularly important when using Dolby
surround. You should only need to make
these settings once (unless you change the
placement of your speakers, or sometimes,
depending on the disc you’re playing). Refer
to the following pages for details on each of
the settings.
TV CONTROL
1 2 3
4 5 6
7 8 9 0
CLEAR
ENTER
SYSTEM SETUP
DVD SETUP
TOP MENU
DVD MENU
SHIFT CHANNEL INPUT VOLUME
SUBTITLE
VOLUME
ANGLE ZOOM
ADVANCED AUTO MIDNIGHT
QUIET/
BASS MODE
DVD
AUDIO
DVD/CD TV FM/AM LINE
L1/L2
SURROUND
PROGRAM
TEST TONE
REPEAT
CH LEVEL
RANDOM
TIMER
DIMMER DVD DISP
ROOM
SETUP SYSTEM DISP MUTE
TUNE +
ST+ ST–
TUNE –
RETURN
FOLDER + FOLDER –
SOUND
MODE
ENTER
STANDBY/ON
4
/ e E/
1 ¡
¢ 8 7
3
1 Press SYSTEM SETUP (SHIFT+DVD
SETUP).
2 Use the / (cursor left/right)
buttons to choose the option you want
to adjust.
It will be easiest to adjust each of the
settings in turn, following the order below.
The current setting is shown for each option
as you cycle through the display.
Front speaker distance setting (page
40)
Specify the distance from your listening
position to the front speakers.
Center speaker distance setting (page
40)
Specifies the distance from your
listening position to the center speaker.
Surround speaker distance setting
(page 40)
Specify the distance from your listening
position to the surround speakers.
Dynamic range control setting (page
40)
Compress the dynamic range of the
sound track.
Dual mono setting (page 41)
Isolate one channel when listening to
discs with dual mono encoding.
LFE attenuator setting (page 41)
Specify the peak level for the LFE
channel.