Pioneer S-DV303 - Manual (Page 49)

Using the timer 09
49
En
English
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct
time for the wake-up timer to work
properly (see page 15).
TV CONTROL
1 2 3
4 5 6
7 8 9 0
CLEAR
ENTER
SYSTEM SETUP
DVD SETUP
TOP MENU
DVD MENU
SHIFT CHANNEL INPUT VOLUME
SUBTITLE
VOLUME
ANGLE ZOOM
ADVANCED AUTO MIDNIGHT
QUIET/
BASS MODE
DVD
AUDIO
DVD/CD TV FM/AM LINE
L1/L2
SURROUND
PROGRAM
TEST TONE
REPEAT
CH LEVEL
RANDOM
TIMER
DIMMER DVD DISP
ROOM
SETUP SYSTEM DISP MUTE
TUNE +
ST+ ST–
TUNE –
RETURN
FOLDER + FOLDER –
SOUND
MODE
ENTER
STANDBY/ON
4
/ e E/
1 ¡
¢ 8 7
3
1 Select the source you want played.
For example, press FM/AM (TUNER on the
front panel) to select the radio as your
source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you’ve selected a CD, make sure that it’s
stopped.
3 Set the volume.
4 Press TIMER (SHIFT+6).
5 Use the / buttons to select WAKE-
UP then press ENTER.
6 Use the / buttons to select TIMER
EDIT then press ENTER.
7 Set the switch-on time.
Use the / buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you’re done.
8 Set the switch-off time.
Use the / buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you’re done.
After pressing ENTER this last time, the
wake-up indicator lights, and the switch-on
and switch-off times are confirmed in the
display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!