Additional information 11, Setting the tv format, Resetting the unit – Pioneer S-DV303 User Manual
Page 57: Switching off the demo, Dimming the display, Changing the frequency step, English
Additional information
11
57
En
English
3
Use the / buttons to select AM 9k /
AM 10k.
The current setting is shown in the display.
4
Use the / buttons to select AM 9k or
AM 10k then press ENTER to confirm.
Setting the TV format
Not applicable to the U.S. model.
• Default setting (European model):
PAL
• Default setting (all other models):
AUTO
The default setting of this unit is
AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO.
If you experience picture distortion with some
discs, set the TV system to match your country
or region.
1
Switch the system into standby.
2
Press SYSTEM SETUP (SHIFT+DVD
SETUP).
3
Use the / buttons to select TV
system (Default setting: AUTO).
The current TV format is shown in the display.
4
Use the / buttons to select either
AUTO, PAL, or NTSC then press ENTER to
confirm.
Resetting the unit
Use this procedure to reset all the player’s
settings to the factory default.
1
Switch the player into standby.
2
Press and hold down the
7 (stop)
button on the front panel until the unit
switches on (about 8 seconds).
All the player’s settings are now reset, and you
should see the ‘Let’s Get Started’ screen.
Switching off the demo
• Default setting:
DEMO ON
This unit has an automatic demo feature that
starts when the unit is plugged in for the first
time. Here’s how to turn it off:
1
Switch the system into standby.
2
Press SYSTEM SETUP (SHIFT+DVD
SETUP).
3
Use the / buttons to select DEMO
mode (Default setting: DEMO ON).
The current setting is shown in the display.
4
Use the / buttons to select DEMO
OFF then press ENTER to confirm.
• After setting the clock, the demo mode
switches off automatically.
Dimming the display
•
Press DIMMER (SHIFT+9) to alternate
between brightness levels on the display.
Changing the frequency step
Not applicable to the European model.
• Default setting (U.S. model):
AM 10k
• Default setting (all other models):
AM 9k
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:
1
Switch the system into standby.
2
Press SYSTEM SETUP (SHIFT+DVD
SETUP).