Pioneer S-DV303 - Manual (Page 45)

Playing sources 07
45
En
1 Select the source you want to
playback.
2 Press AUTO.
For multi-channel sources, Dolby/DTS
decoding is selected automatically accord-
ing to the source and
AUTO shows in the
display.
Pressing SURROUND repeatedly during
playback of a multi-channel source will cycle
through the following menu:
Stereo
Auto
Dolby Digital/DTS
Selecting STEREO downmixes a multi-
channel source to your two-front speakers.
For a two channel source, you can press
SURROUND repeatedly to select between
the three Pro Logic II modes (below).
Pro Logic II
Music
Pro Logic Stereo
Auto
Pro Logic II
Movie
Refer to page 43 for more details about each
mode.
3 Start playback of the component you
selected in step 1.
• When playing 96 kHz digital signal disc
formats, you can only use the STEREO
listening mode.
• When the headphones are connected,
you can only use the STEREO listening
mode.
Listening to a stereo source
When AUTO is selected, a stereo source is
detected automatically and plays through the
front speakers only. To listen to a stereo
source with surround sound, see Listening to
multi-channel playback
on the previous
page.
SUBTITLE
VOLUME
ANGLE ZOOM
ADVANCED AUTO MIDNIGHT
QUIET/
BASS MODE
DVD
AUDIO
DVD/CD TV FM/AM LINE
L1/L2
SURROUND
ROOM
SETUP SYSTEM DISP MUTE
STANDBY/ON
1 Select the stereo source you want to
playback.
2 Press AUTO.
3 Start playback of the component you
selected in step 1.