Python 671XP - Manual (Page 20)

17 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
The remote will indicate disarm notification with 2 beeps and 3
flashes of the Orange LED.
silent mode
To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press for less than one second before
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
The remote responds with the normal arm/disarm notifications
in silent mode. (If the remote has beeps programmed On, the
remote will beep.)
note: The Warn Away® response to lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an area
you want chirp-free. The system is still fully capable of trig-
gering. Only the Warn Away® response is bypassed.
➜
important! The unit can be programmed to respond to
one to five pulses of the Valet
® button for the disarm
function. Be sure to check with the installer for the
desired programming.