Triggered sequence – Python 671XP User Manual

Page 35

Advertising
background image

32

© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .

if someone takes your keys and 2-way remote by force in a

parking lot.

vrs

®

triggered sequence

Fifteen seconds

after the last door has closed, the in-vehicle LED

will begin flashing. This delay is intended to allow you time to

distance yourself from your vehicle in the event of a carjacking.

Forty-five seconds later

, the siren begins chirping and the park-

ing lights begin flashing. This time could be used to notify au-

thorities that your vehicle has been hijacked, and tell them what

the VRS

®

will do next.

Fifteen seconds

after the siren chirps begin, the siren’s output will

change to a continuous blast.

From this point on, when the ignition key is turned off, the VRS

®

will immediately turn on the starter kill. This will prevent the

vehicle from being restarted, thus immobilizing it at that spot.

Three minutes

after the constant siren output begins, the flashing

parking lights and the siren will stop. The starter kill will remain

active until the system is disarmed. If the door is opened or the

ignition is turned off and on in an attempt to restart the car, the

siren and light flashing will begin again.

note: If the VRS

®

system is armed while operating the vehi-

cle and not disarmed prior to leaving the vehicle, it is still
armed and will trigger the next time the vehicle is driven.

Advertising