Python 671XP User Manual
Page 23
20
© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
NPC
®
is programmable. See
Programming Options section of
this guide.
a
au
uxxiilliia
arryy o
ou
uttp
pu
uttss ((o
op
pttiio
on
nss))
This system also supplies outputs that can control convenience
options such as remote control trunk release and window automa-
tion. Consult your dealer for available options for your system.
Channel 2 Trunk release: When connected, pressing
for 1.5
seconds will remotely release the vehicle trunk lid.
Channel 4 auxiliary output: When connected, pressing
and
will immediately activate this output to control an
additional convenience option.
Channel 5 auxiliary output: When connected, pressing
and
will immediately activate this output to control an
additional convenience option.
The remote will respond with a page notification consisting of
an output tone (once) and the Yellow LED will flash 3-times.
note: Arming and disarming the system does not reset this
function.The only ways to reset a bypassed zone are for it
to not trigger for 60 minutes, or to turn on the ignition. If
testing your system, it is important to remember that the
NPC® programming can cause zones to be bypassed and
appear to stop working. If five chirps are heard when dis-
arming, NPC® has been engaged. If you wish to clear the
NPC® memory, turn the ignition key on.