Panasonic KX-FC962HK - Manual (Page 7)

7
1. Installation and Quick Start
Connections and Setup 1.4 Connections
Important:
L The unit will not function when there is a
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
1.4.1 Base unit
Caution:
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
L Keep the base unit away from walls as far
as possible to prevent a recording paper
jam.
Note:
L Before you can make calls, the dialling mode
setting may need to be changed (page 19).
1.4.2 Charger unit
Caution:
L USE ONLY WITH the included Panasonic
AC adaptor.
L The AC adaptor must remain connected at
all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
1 Paper stacker
L The paper stacker will drop to a lower
angle after inserting into the base unit.
L The paper stacker may not be shown in
all illustrations in these operating
instructions.
2 Power cord
L Connect to the power outlet (220 V –
240V, 50/60 Hz).
3 Telephone line cord
L Connect to [LINE] jack and a single
telephone line jack.
4 [EXT] jack
L Remove the stopper if attached.
L Use only to connect extension
telephones for access to emergency
services during power failure.
5 Handset cord
6 Extension telephone (not included)
1
5
4
6
3 2
1 Hooks
L Fasten the AC adaptor cord to prevent it
from being disconnected.
2 AC adaptor
L Connect to the power outlet (220 V – 240
V, 50/60 Hz).
2
1
FC962HK-PFQX2283ZA-en.book Page 7 Thursday, September 15, 2005 4:20 PM