Polycom CX700 - Manual (Page 19)

2 - 1
2
Customizing Your Polycom ® CX700
IP Phone
You can customize your Polycom CX700 IP phone by adjusting the setting for
time and date, display contrast, and ring type, and other features. You can add
contacts to the phone’s directory manually or from call lists. You can handle
incoming calls from different contacts in different ways.
This chapter provides basic operating instructions for customizing your
Polycom CX700 IP phone. This chapter contains instructions on:
• Configuring Basic Settings
• Managing Call Lists
• Managing Contacts
To read about the phone’s basic features, refer to Using the Basic Features of
Your Polycom® CX700 IP Phone on page 3-1 . To troubleshoot issues with the
phone, refer to Troubleshooting Your Polycom® CX700 IP Phone on page 4-1 .
If you require additional information or assistance with your new phone,
contact your system administrator.
Configuring Basic Settings
You can configure the basic settings by selecting the Settings soft key, .
It appears on the left-hand side of the graphic display. You can change the
following settings:
• The date and time format
• The location and time zone
• The ring tone heard when there is an incoming call
• Language support (localization)