Polycom CX700 - Manual (Page 3)

iii
About This Guide
Thank you for choosing the Polycom CX700 IP phone which enables a new era
in unified communications currently unavailable with traditional desktop
phones. Connecting a Polycom CX700 to Microsoft ® Office Communications
Server 2007 R2 allows you to place regular and Voice over Internet Protocol
(VoIP) calls, answer calls, forward calls, keep a record of all calls, start a
conference call, and click to call from a list of your personal contacts through
integration with Microsoft’s Active Directory and Microsoft Exchange Server.
Using your Polycom CX700 lets you take advantage of Microsoft Office
Communications Server 2007 R2 without needing access to a computer. For
more information on what’s new in Microsoft Office Communications Server
2007 R2, refer to
http://www.microsoft.com/communicationsserver/en/us/whats-new.aspx
This User Guide provides everything you need to quickly use your new
phone. Verify with your system administrator that the network is prepared for
configuring your Polycom CX700 IP phone, you are provisioned in Microsoft
Office Communications Server 2007 R2, and your network is correctly
configured. As well, read the Parts List and Safety Notices sections in this
guide before you set up and use the Polycom CX700 IP phone. This
information can also be found at
http://www.polycom.com/support/voicedocumentation/ .
Changes to This Guide
The following sections are new for this edition:
• Connecting to Your Computer Using a USB Cable on page 1-5
• Ring Tones on page 2-4
• Language Support on page 2-5
Major updates have occurred to the following sections since the previous
edition:
• Logging in on Your Polycom CX700 IP Phone on page 1-8
• Redialing Numbers on page 3-5