Panasonic KX-MB2030EX - Manual (Page 65)

Feature/Code Selection
Setting the memory reception
alert
MBNM4NM3NM7N To alert you with a beeping sound when a received fax document is stored into
memory.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 81 to page 83 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
R If documents are stored into memory due to activating the web fax preview
(feature #448 on page 53), the unit will not beep. However, the unit will start
to beep when the memory is nearly full (KX-MB2030 only).
Setting friendly reception
MBNM4NM3NM8N To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N “OFF”:
You have to press MStartN, and then M2N for fax reception.
M1N “ON” (default):
You do not have to press MStartN, and then M2N for fax reception.
Receiving a fax into the
computer
MBNM4NM4NM2N If you wish to receive a fax into a computer, activate this feature and run [PC
FAX] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature #448
on page 53) (KX-MB2030 only).
M0N “OFF”: Deactivates this feature.
M1N “ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents into memory, and then transfer the
data after recognition of the computer connection.
M2N “CONNECTED” (default): If the unit recognizes the connection to the
computer, it will transfer received documents to the computer. If the unit cannot
recognize the connection, it will print the data.
Setting the computer for PC
fax reception
MBNM4NM4NM3N
(KX-MB2030 only) To select the computer that will be used for receiving a fax. See page 24 for
details.
Setting the fax preview mode
MBNM4NM4NM8N
(KX-MB2030 only) See page 53 for details.
Setting the web fax preview
access code
MBNM4NM5NM0N
(KX-MB2030 only) See page 53 for details.
Setting notification of fax
reception
MBNM4NM5NM1N M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The computer connected to your unit using USB/LAN will receive a
notification when a fax document is received.
Note:
R For LAN connection (KX-MB2030 only): Register computers to which fax
reception notifications will be sent through the web browser interface
(page 66).
65
8. Programmable Features