Panasonic KX-MB2030EX - Manual (Page 66)

Feature/Code Selection
Resetting fax features to their
default settings
MBNM4NM5NM9N M0N “NO” (default)
M1N “YES”
To reset the fax features:
1. MMenuN A MBNM4NM5NM9N
2. Press M1N to select “YES”. A MSetN A MSetN A MMenuN
Note:
R The PC fax reception (feature #443 on page 24) will not be reset
(KX-MB2030 only).
R If you select “YES”, the unit will automatically print out any received fax
documents that have been stored into memory:
– PC fax setting (feature #442 on page 65).
– Fax preview (feature #448 on page 53) (KX-MB2030 only).
Setting the PC information for
notification of fax reception
(KX-MB2030, LAN connection
only)
R This feature can be
programmed only through
the web browser interface.
Select the PC to send fax reception notification message to (up to 6
destinations).
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). A [OK]
4. Select the [FAX FEATURE] tab.
5. Click [Edit] next to [RECEIVE PC LIST].
6. Click [List] next to the desired destination.
7. Click the desired PC from the list. A [Submit]
8. Close the web browser.
66
8. Programmable Features