Help, Reports and displays, 1 report messages (kx-mb2025/kx-mb2030 only) – Panasonic KX-MB2030EX User Manual

Page 80: Report messages (kx-mb2025/kx-mb2030, Only)

Advertising
background image

10.1 Report messages (KX-MB2025/KX-MB2030 only)

To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the sending
and journal reports (page 42).

Message

Code

Cause & Solution

COMMUNICATION ERROR

40-42
46-72

FF

R A transmission or reception error occurred. Try

again or check with the other party.

43
44

R A line problem occurred. Connect the telephone line

cord to a different jack and try again.

R An overseas transmission error occurred. Try using

the overseas mode (feature #411 on page 63).

DOCUMENT JAMMED

-----

R Remove the jammed document (page 97).

ERROR-NOT YOUR UNIT

53
54
59
70

R A transmission or reception error occurred because

of a problem with the other party’s fax machine.
Check with the other party.

JUNK FAX PROH. REJECT

-----

R The junk fax prohibitor feature of this unit rejected

fax reception.

MEMORY FULL

-----

R The memory is full of received documents due to a

lack of recording paper or a recording paper jam.
Load paper (page 14) or remove the jammed paper
(page 92).

R If the PC fax setting (feature #442 on page 65) is set

to “ALWAYS”, check the connection between the
computer and the unit.

R If your unit is connected to the computer via the LAN

and the fax preview mode (feature #448 on
page 53) is set to “ON”, view, print or save the
documents on the web browser, and then erase
unnecessary documents (page 53).

NO DOCUMENT / FAILED PICKUP

-----

R The document was not fed into the unit properly.

Re-insert it and try again.

OTHER FAX NOT RESPONDING

-----

R The other party’s fax machine is busy or has run out

of recording paper. Try again.

R The other party’s fax machine rings too many times.

Send the fax manually (page 42).

R The other party’s machine is not a fax machine.

Check with the other party.

R The number you dialled is not in service.

PRESSED THE ‘Stop’ KEY

-----

R MStopN was pressed and fax communication was

cancelled.

THE COVER WAS OPENED

-----

R The top cover was opened. Close it and try again.

OK

-----

R Fax transmission or reception was successful.

80

10. . Help

10. Help

Advertising
This manual is related to the following products: