Paradyne 3162 User Manual
Page 13
11
Table 7. User Interface – Communication Port Configuration Options (2 of 2)
Option
Comments/Description
Factory 2
Factory 1
1.2
1.2
2.4
2.4
4.8
4.8
Data Rate:
9.6
9.6
Selects the bit rate for the COM
port.
14.4
14.4
port.
19.2
19.2
38.4
38.4
Character Length:
7
7
Selects the character length for the
Character Length:
8
8
Selects the character length for the
COM port.
None
None
Parity:
Even
Even
Selects the parity for the COM port.
Odd
Odd
p
y
p
1
1
Stop Bits:
1.5
1.5
Selects the number of stop bits for
the COM port.
2
2
the COM port.
Ignore Control
Disable
Disable
Specifies whether the COM port
Ignore Control
Leads:
DTR
DTR
Specifies whether the COM port
ignores DTR.
Password Required:
Enable
Enable
Controls whether a password is
Password Required:
Disable
Disable
Controls whether a password is
required during a call setup.
Inactivity Timeout:
Enable
Enable
Specifies whether the
communication port disconnects
Inactivity Timeout:
Disable
Disable
p
communication port disconnects
after a certain period of inactivity.
5
5
Disconnect Time:
Up
Up
Specifies the period of inactivity
(1 to 60 minutes) that causes a
Disconnect Time:
Down
Down
(1 to 60 minutes) that causes a
disconnect if Inactivity Timeout is
enabled.
Save
Save
enabled.