Paradyne 3162 User Manual
Page 15
13
Table 9. User Interface – Telnet Sessions Configuration Options
Option
Factory 1
Factory 2
Comments/Description
Telnet Session:
Enable
Enable
Specifies whether the DSU/CSU
responds to Telnet session
Telnet Session:
Disable
Disable
p
responds to Telnet session
requests.
Password Required:
Enable
Enable
Specifies whether a password is
Password Required:
Disable
Disable
Specifies whether a password is
required for Telnet sessions.
Inactivity Timeout:
Enable
Enable
Specifies whether a Telnet session
disconnects after a certain period
Inactivity Timeout:
Disable
Disable
p
disconnects after a certain period
of inactivity.
Disconnect Time:
5
5
The period of inactivity (1 to
60 minutes) that causes a
Disconnect Time:
1–60
1–60
60 minutes) that causes a
disconnect if Inactivity Timeout is
enabled.
Table 10. User Interface – Auxiliary Port Configuration Options
Option
Factory 1
Factory 2
Comments/Description
None
None
Port Use:
Mgmt
Mgmt
Controls how the auxiliary port is
used.
Daisy
Daisy
used.
9.6
9.6
Data Rate (Kbps):
14.4
14.4
Configures the bit rate for the
Data Rate (Kbps):
19.2
19.2
Configures the bit rate for the
auxiliary port.
38.4
38.4