Peripheral Electronics Aux2Car - Manual (Page 14)

VEHICLE INSTALLATION
Honda – All Honda except Passport
Before connecting any cables to the Aux2Car you must set the dip switches to the Aux2Car Aux2Car
correct position. If you set the dip-switches after you have connected cables to the
interface, you must disconnect and reconnect them for the Aux2Car to operate. Aux2Car Aux2Car
DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE Aux2Car !!! Aux2Car Aux2Car
1 2 3 4 5 6 7 8
off off off on off off off on
SETTINGS FOR
HONDA
Compatible with Honda 1992- 2004 except:
Honda Passport
2003-2004 Accord ; 2003-2004 Element ; 2004 +
Honda S2000
Honda uses 2 cables:
1992- 1997 – PXHCH2 cable
1998-2004 – PXHHD1 cable
Connects behind the radio
Switch to the Aux2car adaptor by pressing the “CD” button.
OPERATION
12