Pioneer VSX-C300 - Manual (Page 19)

English
19
En
Displays & Controls
Rear Panel
1 DVD input terminals (connect a DVD player here,
see page 11)
Use these terminals to input the signal from a DVD
player (or another kind of video player, if you
choose). Make sure to connect to the video terminals
and both the analog and optical digital terminals for
audio. To be able to play Dolby Digital and other
surround soundtracks you need to make digital
connections. To do this use the optical digital
terminal here.
2 TV/SAT input terminals (connect a TV/SAT set
top box here, see page 12)
Use these terminals to input a TV/SAT signal (or
from another kind of source, if you choose). Make
sure to connect to the video terminals and both the
analog and optical digital terminals for audio. To be
able to play MPEG and other surround soundtracks
you need to make digital connections. To do this use
the optical digital terminal here.
3 VCR IN/OUT terminals (connect a VCR here, see
page 13)
Use these terminals to input and output the video
signal from a VCR (or a video camera, DVD recorder,
etc.). These are analog jacks.
4 MONITOR output terminals (connect a TV or
monitor here, see page 11)
Use these terminals to output the signal from the
above terminals 1, 2 or 3 and FRONT. These are
video jacks. MONITOR 2 outputs the same signal as
MONITOR 1.
DVD
IN
VCR
IN
VCR
OUT
MONITOR
OUT TV/
SAT
IN
DIGITAL
(OPTICAL)
AUDIO AUDIO
FM UNBAL 75 Ω AM LOOP
ANTENNA
VIDEO
R L
1
2
R L
R L
SUB
WOOFER
OUT
IN OUT
CONTROL
AC IN
FRONT
R L
SURROUND
R L CENTER SPEAKERS
1 4
2
3
8
6
DVD
IN
R L
TV/
SAT
IN
MONITOR
OUT
1
2
5
VCR
IN
VCR
OUT
R L
R L
FM UNBAL 75 Ω AM LOOP
ANTENNA
7
SUB
WOOFER
OUT
FRONT
R L
SURROUND
R L
CENTER SPEAKERS
IN OUT
CONTROL
9
AC IN
5 RADIO antenna terminals
Connect AM or FM antennas here (see page 16).
6 SUBWOOFER output terminals
Use this terminal to connect a powered subwoofer to
the receiver (see page 14).
7 SPEAKER terminals
Use these terminals to connect speakers to the
receiver (see page 14).
8 CONTROL IN/OUT terminal
You can use this jack to hook up other PIONEER
equipment, that bears the
О О О О О mark, so that you can
control them all with the remote control for this
receiver (see page 17).
9 AC IN (Power In)
Hook up the power cord to this terminal.