Pioneer VSX-C300 - Manual (Page 20)

20
En
Displays & Controls
Remote Control
The remote control is divided into roughly three parts for easier understanding: 1) Receiver controls; 2) TV controls
and 3) Playback controls, sound setup and other component controls.
All the buttons on the remote control are explained here.
1) Receiver controls
These controls are for the receiver itself.
S M L
VOLUME CHANNEL
TUNE
ST
CH.
TOP MENU
ST
DVD
TV/SAT
RECEIVER
REMOTE
SETUP
INPUT
SELECT
INPUT SELECT
MASTER
VOLUME
RECEIVER
TV
SOURCE
TV CONTROL
ROOM SETUP
TUNER FRONT MUTING DISPLAY
VCR
TV
7 8 3
BAND CLASS EDIT
RETURN
RECEIVER (Power) button: This
switches between STANDBY mode and
power ON for this receiver.
Input/Control Mode Select buttons:
Use to put the receiver/remote control
in the input stated on the button. If the
Direct Selection is off, then these
buttons won’t put the receiver in the
input written on the button.
Control Mode Select buttons:
Use these buttons to put the remote
control in receiver or TV mode
(see page 23).
LED indicator: This indicator flashes
when a command is sent from the remote
control to the receiver. It also flashes at
when teaching the receiver preset codes.
INPUT SELECT button (see page 23):
Use to select the playback source. This
button lets you cycle through the different
inputs: DVD, TV/SAT, VCR, TUNER and
FRONT.
MASTER VOLUME +/– buttons: Use to
set the overall listening volume.
REMOTE SETUP button (see page 42):
Use this button when setting up the
remote control with the REMOTE SETUP
feature.
MUTING button: Use to mute the sound
or restore the sound if it has been muted.
DISPLAY button (see page 39): Use to
display information. You can confirm
what settings have been made by going
through the various displays.
S M L
VOLUME CHANNEL
TUNE
TOP MENU
INPUT SELECT
RECEIVER
TV
SOURCE
TV CONTROL
ROOM SETUP
TUNER FRONT MUTING DISPLAY
TV
7 8 3
BAND
DISPLAY
CLASS EDIT
TV (Power) button:
Use to turn on/off the power of the TV.
INPUT SELECT button:
Use to select the TV input.
VOLUME +/– buttons:
Use to adjust the volume on your TV.
CHANNEL +/– buttons:
Use to select channels on your TV.
2) TV controls
These controls are for your TV. They are dedicated TV controls and will work no matter what mode the remote
control is in.