Panasonic DMC-TS1 User Manual
Page 29
29
VQT1Z45
Preparation
•
[AUTO POWER OFF] is set to [5MIN. ] in the Intelligent Auto Mode and the Clipboard Mode.
•
[AUTO POWER OFF] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or playback zoom.
•
[AUTO POWER OFF] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[AUTO DEMO]
•
[AUTO LCD OFF] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
While the self-timer is set
–
While recording motion pictures
–
While the menu screen is displayed
–
[AUTO DEMO]
•
The auto review function is activated regardless of its setting when using auto bracket (P56),
[HI-SPEED BURST] (P64) and [FLASH BURST] (P64) in Scene mode, Burst mode (P88) and
when recording still pictures with audio (P90). (The pictures cannot be enlarged.)
•
In Intelligent Auto Mode, the auto review function is fixed to [2SEC.].
•
[AUTO REVIEW] does not work in recording motion pictures.
•
The folder number is updated and the file number starts from 0001. (P121)
•
A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P32) after saving the data on a PC or elsewhere.
•
To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
[AUTO POWER OFF]
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displayed until any one of the buttons
is pressed.
[ZOOM]:
The picture is displayed for 1 second and then
enlarged 4
k and displayed for 1 more second.
v [NO.RESET]
Reset the file number of the next recording to 0001.
VQT1Z45~_eng.book 29 ページ ２００９年１月２８日 水曜日 午後９時３０分