Panasonic DMC-TS1 User Manual

Page 82

Advertising
background image

VQT1Z45

82

Advanced (Recording pictures)

For details on [REC] mode menu settings, refer to P25.
Set the compression rate at which the pictures are to be stored.
Applicable modes:

·

¿

Note

Refer to P143 for information about the number of recordable pictures.

For details on [REC] mode menu settings, refer to P25.
This allows you to select the aspect ratio of the pictures to suit printing or the playback method.
Applicable modes:

·

¿

Note

The ends of the recorded pictures may be cut at printing so check before printing. (P140)

For details on [REC] mode menu settings, refer to P25.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:

·

[OFF]/[

]/[

]/[

]

The upper limit of the ISO sensitivity can be set.

The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.

Note

Depending on the brightness and how fast the subject is moving, jitter may not be avoided.

Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.

To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL]. (P89)

A [QUALITY]

[A]:

Fine (when giving priority to the picture quality)

[]:

Standard (when using the standard picture quality and increasing the number of
pictures to be recorded without changing the number of pixels)

? [ASPECT RATIO]

[X]:

[ASPECT RATIO] of a 4:3 TV

[Y]: [ASPECT RATIO] of a 35 mm film camera

[W]: [ASPECT RATIO] of a high-definition TV, etc.

[X]

[Y]

[W]

[INTELLIGENT ISO]

ISOMAX

400

ISOMAX

800

ISOMAX

1600

VQT1Z45~_eng.book 82 ページ 2009年1月28日 水曜日 午後9時30分

Advertising