PACKARD BELL MH4000 - Manual (Page 17)

2-2
Features
■ Hardware monitors (temperature and voltage) and
software monitors to indicate failures.
■ Easy access to all parts for service.
Expanding the Server as Needs Grow
The typical minimum system configuration could
include the following:
■ Board set with 64 MB memory board, system board,
and two processor boards with one Pentium

Pro
microprocessor.
■ Diskette drive
■ One SCSI hard drive
■ CD-ROM drive
■ Network add-in boards
■ Two 330 Watt power supplies
■ SCSI drive backplane
■ Five chassis hot swap fan modules (six fans)
■ Onboard 1 MB video memory.
As server/client needs grow, you can expand system
processor capacity, memory, drives, and the number of
power supplies.
■ System board has two slots for processor boards.
Each processor board may contain up to two
processors, for a configurable range of one, two,
three, or four processors.
■ System board has two video memory upgrade
sockets (512 KB each) for an additional 1 MB of
video memory.
■ Memory board supports 16 DIMM devices for a
minimum memory size of 64 MB; maximum is 4 GB.