PACKARD BELL MH4000 - Manual (Page 177)

A-7
System Cabling
Figure A-4. Rerouting the Ultra Wide SCSI Cable
Configuring the RAID Controller
The DACCF utility is included with the RAID
controller. This configuration utility allows you to
configure your disk array before installing your
network operating system. The DAC960PDU RAID
controller supports various versions of RAID
technology (referred to as RAID levels). To use any
RAID level, you must configure the RAID controller
using the DACCF configuration utility prior to
installing your Network Operating System. For an
explanation of this utility, refer to the DACCF Utilities
Installation Guide and User Manual that was shipped
with the server. Chapter 2 of the manual
(Configuration Strategies) describes RAID technology
and provides tips on making your array perform well in
your specific application. Chapter 3 (Preparing the
Array) covers array hardware preparation,
configuration, and initialization. After completing the
steps in chapter 3, you can install your Network
Operating System.