Panasonic KX-FM255 - Manual (Page 81)

81
M
u
lt
i-
F
u
n
c
tio
n
C
e
n
te
r/
P
C
Installing the Multi-Function Center software
Setup (PC)
1 Start Windows 3.1/3.11/95 and close all
applications.
2 Insert the CD into your CD-ROM drive.
¡ The Welcome window will automatically
appear after 4 or 5 seconds.
If the Welcome window does not appear,
follow the instructions below.
» Windows 95 users:
Click Start and select Run... .
At the command line, type “c(or d):\setup”
to set the CD-ROM drive and click OK.
» Windows 3.1 or 3.11 users:
From the Program Manager, click File and
select Run... .
At the command line, type “c(or d):\setup”
to set the CD-ROM drive and click OK.
3 Follow the instructions on the screen until all
files have been installed.
4 Remove the CD from the CD-ROM drive and
click Finish to reboot your PC.
For Windows 3.1
For Windows 95
Note:
¡ If other communication software which uses the serial port has been installed, the communication setting may
be changed and the communication software may not function properly when the Multi-Function Center
software is installed.
¡ The dialog box images may differ according to applications.