Panasonic WJ-DR200 - Manual (Page 23)

AUDIO OFF
-21-
MULTI SHOT(MODE1)
CAPTURE RATE 0.20 sec
RECORD FRAMES 2 ( 0.4sec)
PRE/POST FRAMES 0 /2
REC PATTERN -
SENSOR REC SAME AS ALARM
PRE/POST FRAMES -
POST REC PATTERN -
● Capture Rate
This item lets you specify the interval (seconds) for
recording of multiple freeze pictures.
1. Move the cursor to the CAPTURE RATE parameter
in the MULTI SHOT menu by pressing the or
button.
2. Select the desired interval by pressing the or
button.
The following intervals are available depending on
the selected pixel number.
720 * 480: 0.07, 0.10, 0.17, 0.20, 0.33, 0.50, 1.0,
2.0, 3.0
720 * 240: 0.03, 0.07, 0.10, 0.17, 0.20, 0.33, 0.50,
1.0, 2.0, 3.0
The default setting is 0.20 sec.
● Recording Frames
This item lets you select the number of frames that are
recorded as freeze pictures on the disc.
The maximum number of frames varies depending on
the selected capture rate as shown below.
If you set the CAPTURE MODE parameter to MULTI
SHOT or TIME LAPSE, make the necessary settings
in the respective submenus shown on the following
pages.
Refer to the Multi Shot menu on page 21 or Time
Lapse menu on page 22 for details.
● Endless Recording Setup
This item lets you enable or disable uninterrupted
recording when the disc space is used up.
This function conforms to REC MODE 1 and is not avail-
able in REC MODE 2.
1. Move the cursor to the ENDLESS parameter in the
REC MODE menu by pressing the or but-
ton.
2. Select either ON or OFF by pressing the or
button.
ON: Continues recording when the disc is full by
overwriting the oldest data.
OFF: Stops recording when the disc is full.
The default setting is OFF.
1. Multi Shot Recording Setup
This menu lets you make the necessary settings for
Multi Shot Recording.
1. Move the cursor to the CAPTURE MODE parameter
in the REC MODE menu by pressing the or
button.
2. Select MULTI SHOT * by pressing the or
button, then press the SET button. The MULTI
SHOT menu shown below appears on the monitor
screen.
3. Move the cursor to the parameters by pressing the
or button, then select the desired mode by
pressing or button.
1. Move the cursor to the RECORD FRAME parameter
in the MULTI SHOT menu by pressing the or
button.
2. Select the desired number of frames by pressing
the or button.
The default setting is 2.
Maximum number of Multi Shots
0.03
0.07
0.10
0.17
0.20
0.33
0.50
1
2
3
Pixel number 720 x 480
AUDIO ON
FINE NORMAL ROUGH FINE NORMAL ROUGH
AUDIO OFF
99 150 230 102 157 247
99 150 230
96 144 216
96 144 216
93 138 203
91 133 192
86 123 173
75 102 133
68 89 111
0.03
0.07
0.10
0.17
0.20
0.33
0.50
1
2
3
Pixel number 720 x 240
AUDIO ON
FINE NORMAL ROUGH FINE NORMAL ROUGH
182 288 384
182 288 384
182 288 384
182 288 384
173 266 346
173 266 346
165 247 314
157 230 288
144 203 247
115 150 173
99 123 138